Metal Holemaking: Annular Cutters, Step Drills, Reamers and Extractors
Posted by Banditos Incorporated on 2026 Nov 15th
Need to make a clean hole in steel, enlarge an existing hole, or remove a broken fastener? Start with the job and the tool you have. The cutter name alone does not tell you whether it will fit your machine or reach through the workpiece.
Making a new hole: annular cutter and mag drill
For a mag drill job, check the required diameter and cutting depth first. Then match the cutter shank, machine, and pilot pin. Holemaker Technology offers annular cutters and magnetic drills, but the correct combination depends on the exact models. Browse the Holemaker Technology range at Banditos.
Drilling or enlarging a hole: step drill, drill bit, or reamer?
A step drill can make several hole sizes with one tool. A twist drill starts a hole at a specified diameter. A reamer is for bringing an existing hole to its required size or alignment. Before choosing, tell us the material, thickness, starting hole, final diameter, and whether you are using a hand drill, impact tool, or mag drill. Explore Drillco drilling and threading tools or the Holemaker Technology range.
Removing a broken bolt or stud
Match the extractor to the fastener size and the pilot hole. Holemaker Technology describes its VersaDrive bolt extraction system as using a left-hand drill bit to make the pilot hole before the extractor. Check that the bit, extractor, adapter, and drive tool are compatible before starting the repair.
What to have ready when you call
Give the Banditos team the material, thickness, hole or fastener size, tool model, and any part number you already have. We can help narrow down the cutter, drill, reamer, or extractor and its required accessories. Banditos. Kings of Service. Shop Holemaker Technology or request a quote for a complex setup.